manualshive.com logo in svg

NEC POWERMATE ENTERPRISE - 10-1997, Manual

Share
Download
NEC POWERMATE ENTERPRISE - 10-1997 Manual Download Page 80

    

 NECCSD Tools and Utilities   4-3

„

configure system connections for peripherals such as
your diskette drive, hard disks, and devices connected to
the printer port and serial ports.

„

customize your system with security features such as
passwords, diskette drive restriction, virus check
reminder, and system backup reminder.

„

set system parameters in the event that you need to
replace the complementary metal oxide semiconductor
(CMOS) battery.

How to Start Setup

 To start the Setup utility, follow these steps:

1. 

Turn on or reboot the system.

2. 

To start the memory test before the system boots up,
press 

F2

 after POST.

 There is about five seconds in which to press 

F2

 before

the system boot continues.

3. 

Setup’s Main Menu appears and looks similar to the
following screen.

Summary of Contents for POWERMATE ENTERPRISE - 10-1997















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands