manualshive.com logo in svg

NEC POWERMATE ENTERPRISE - 10-1997, Manual

Share
Download
NEC POWERMATE ENTERPRISE - 10-1997 Manual Download Page 216

    

 7-8   24-Hour Information Services

„

Access NEC BBS

„

Access CompuServe Information Services

„

Exit.

4. 

Exit anytime by double-clicking on the rectangle in the
upper left corner of the screen.

E-MAIL/FAX TECHNICAL SUPPORT SERVICE

 The NECCSD Technical Support Center offers technical
support by E-mail over the Internet network if you have a
modem. The Internet address is:

 

[email protected]

 You can also fax technical questions to the NECCSD
Technical Support Center if you have access to a fax
machine or fax/modem. The fax number is:

 

(978) 635-4100

 When using the E-mail or fax support service, you should
include the following words in the subject field for prompt
response from the appropriate technical person:

„

Desktop

„

Monitor

„

CD-ROM

„

Printer

„

Notebook.

 You should provide as much specific information about
your questions as possible. Also, if you are sending a fax,
please include your voice telephone number and your fax
number with the question. You will receive a response to
your questions within one business day.

Summary of Contents for POWERMATE ENTERPRISE - 10-1997















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands