manualshive.com logo in svg

NEC POWERMATE ENTERPRISE - 10-1997, Manual

Share
Download
NEC POWERMATE ENTERPRISE - 10-1997 Manual Download Page 134

    

 5-14   Installing Options

Removing the Chassis Floor

To remove the chassis floor, proceed as follows. (If you
have a desktop system, disregard this section.)

1. 

Remove the system unit cover and stand (see the sections
“Removing the Minitower Cover,” and “Removing the
Stand”).

2. 

Place the system unit on its right side.

3. 

Loosen the thumbscrew holding the floor to the edge of
the chassis.

 Locating the chassis floor thumb screw

4. 

Slide the floor back about 1/2 inch along the chassis.

5. 

Once the floor tabs are free of the slots in the chassis,
angle the top edge of the floor away from the chassis.
When the floor angles away from the chassis, its lower
edge disengages from the chassis.

 

Summary of Contents for POWERMATE ENTERPRISE - 10-1997















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands