manualshive.com logo in svg

NEC POWERMATE ENTERPRISE - 10-1997, Manual

Share
Download
NEC POWERMATE ENTERPRISE - 10-1997 Manual Download Page 47

    

 2-10   Using Your Computer

Using Diskettes

 Follow these steps to insert a 3 1/2-inch diskette in the
standard diskette drive.

1. 

Holding the diskette at its top edge, insert it (label side
facing left in the desktop or facing up in the minitower),
into the diskette drive.

2. 

Insert the diskette all the way into the drive until you
hear a click.

 

NOTE

 

If your diskette did not come formatted, you

must format it before storing information on it. See
your operating system documentation for
information about formatting a diskette.

 

!

CAUTION: 

Do not format your hard disk.

Formatting the hard disk will erase all
preinstalled applications.

Summary of Contents for POWERMATE ENTERPRISE - 10-1997















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands