manualshive.com logo in svg

NEC POWERMATE ENTERPRISE - 10-1997, Manual

Share
Download
NEC POWERMATE ENTERPRISE - 10-1997 Manual Download Page 143

    

 Installing Options   5-23

 

NOTE

Before removing the expansion board in the

minitower chassis, you must remove the AGP Video
board (if installed) and the chassis floor (see the
sections “AGP Video Board Removal” and
“Minitower Stand and Chassis Floor Removal and
Replacement”).

2. 

Label and remove any cables connected to the board.

3. 

Remove the screw that secures the board to the support
bracket. Set the screw aside (it will be used to secure the
slot cover once the board is removed).

4. 

Pull the board out of the connector. You might have to
gently rock the board from side-to-side to release it from
the connector. Pull the board out of the expansion slot.

 Removing the expansion board in the desktop

 

Summary of Contents for POWERMATE ENTERPRISE - 10-1997















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands