NEC POWERMATE ENTERPRISE - 10-1997 Manual Download Page 114

Page: 114 / 270

NECCSD Tools and Utilities 4-37

If you want to retain the present partition structure, go
to the next step. If you want to partition the hard disk,
go to step 10.

Click

Skip

on the Partitioning the Hard Drive screen to

retain the present partition structure on the hard disk (go
to step 10 if you want to partition the hard disk).

The Format Mode screen appears with four options:
Back, Exit, Quick, and Full.

Click

Back

to return to the Partition Information

screen.

Click

Exit

to terminate the restore process.

Click

Quick

to do a quick hard disk format.

Click

Full

to do a full hard disk format.

Format Mode Screen

Summary of Contents for POWERMATE ENTERPRISE - 10-1997















































































































































































































































































Search results

Summary of Contents for POWERMATE ENTERPRISE - 10-1997

Reviews:

Brands by name

Popular brands

NEC POWERMATE ENTERPRISE - 10-1997, Manual

Search results

Summary of Contents for POWERMATE ENTERPRISE - 10-1997

Reviews:

Brands by name

Popular brands