![background image](http://html1.mh-extra.com/html/nec/powermate-enterprise-10-1997/powermate-enterprise-10-1997_manual_4109366193.webp)
5-72 Installing Options
8.
Replace the metal slot cover and front panel (see
“Replacing the Front Panel”).
9.
Replace the system unit cover (see “Replacing the
System Unit Cover”).
10.
Run the Setup program to set the new configuration
(see “The Setup Utility” in Chapter 4).
Replacing the Internal Hard Disk Drive
Your system has two internal hard disk drive slots located
near the top rear of the chassis. You can upgrade the system
by replacing an existing hard disk drive, or by adding
another one.
If the system has one hard disk drive, it should be located in
the inner of the two internal hard disk drive slots. If you are
adding an additional hard disk drive, install it in the outer of
the two internal hard disk drive slots.
NOTE
If your system has two hard disk drives and
you are upgrading the drive in the inner of the two
slots, remove both hard disk drives, add the new
hard disk drive to the inner slot, and then install the
remaining drive in the outer slot.
To install a 3 1/2-inch internal hard disk drive proceed as
follows.
1.
Follow the preinstallation instructions that come with
your device, such as setting jumpers and switches.
See “Preparing the Device” for device preparation
information.
2.
Remove the system unit cover (see “Removing the
System Unit Cover”).
Summary of Contents for POWERMATE ENTERPRISE - 10-1997
