manualshive.com logo in svg

NEC POWERMATE ENTERPRISE - 10-1997, Manual

Share
Download
NEC POWERMATE ENTERPRISE - 10-1997 Manual Download Page 217

    

 24-Hour Information Services   7-9

INTERNET

 If you have a modem, you can access the NECCSD Home
Page on the Internet World Wide Web. You can do this
through a commercial online service or through your
Internet account. The NECCSD Home Page contains
general information about NECCSD products.

 You can also use the Internet to access the NECCSD FTP
(file transfer protocol) site to download various files (video
drivers, printer drivers, BIOS updates). The files are
essentially the same files as on the NECCSD Bulletin Board
System.

 To access the World-Wide-Web NECCSD Home Page,
enter the following Internet Uniform Resource Locator
(URL) through your service:

 

http://www.nec-computers.com/

 To access the NECCSD FTP site, enter the following
Internet ftp address through your service:

 

ftp.nectech.com

 Once in the file menu, follow the prompts to choose and
download the file(s) you want.

Summary of Contents for POWERMATE ENTERPRISE - 10-1997















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands