manualshive.com logo in svg

NEC POWERMATE ENTERPRISE - 10-1997, Manual

Share
Download
NEC POWERMATE ENTERPRISE - 10-1997 Manual Download Page 188

    

 Installing Options   5-67

 Locating the blank panel tabs

6. 

Press the tabs on either side of the metal slot cover on
the chassis and set the the slot cover aside.

7. 

Install the device (see “Installing a 5 1/4-Inch Device”).

Replacing the Minitower Front Panel

 If you remove a 5 1/4-inch device from your system, you
need to cover the opening in the front panel with a blank
panel. Do this before replacing the front panel.

 To replace the front panel, proceed as follows.

1. 

Replace the blank panel if necessary. Press the blank
panel into the inside of the front panel (over the empty
slot). Press until the four tabs lock the panel in place.

 

Summary of Contents for POWERMATE ENTERPRISE - 10-1997















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands