5-46 Installing Options
Diskette Drive Signal Cable
In desktop systems, a two-connector diskette drive signal
cable comes attached to the riser board and to the standard
1.44-MB diskette drive.
In minitower systems, a three-connector diskette drive
signal cable comes attached to the riser board and to the
standard 1.44-MB diskette drive.
The installation of a second diskette drive in a desktop
system requires the replacement of the existing diskette
drive signal cable with a three-connector cable (part number
158-050857-003). Connect an optional diskette drive to the
middle connector on the replacement cable.
The colored edge of the cable goes to pin 1 on the cable
connector. Align the red edge of the cable with pin 1 (the
notched end) on the drive connector.
The following figure shows a typical three-connector
diskette drive signal cable.
Summary of Contents for POWERMATE ENTERPRISE - 10-1997
