Installing Options 5-15
DIMM Upgrade
Memory upgrades are installed into memory module sockets
on the system board. The system board provides two sockets
for memory modules and supports up to 256 MB of high-
speed memory. The system supports SDRAM modules in
16-, 32-, 64-, and 128-MB, 64-bit, non-parity memory
configurations.
Use the following guidelines in selecting DIMM types:
memory can be installed in one or both sockets
the size of the DIMMs can vary between sockets
single- and double-sided DIMMs are supported.
Note:
ECC DIMMs are
not supported.
To determine what configuration of DIMMs to use, see the
table, “Supported DIMMs.” For sample memory
configurations, see the table “Sample DIMM Upgrade Paths.”
To locate memory module sockets on the system board see
the figure “System board sockets and connectors” later in this
section under “Removing a DIMM.” To determine the
memory you need to purchase for a memory upgrade, see
“Checking System Memory.”
