Setting Up the System 2-3
Plug the AC adapter into the DC IN jack on the rear of
the right speaker and into a surge protector
(recommended) or a properly grounded wall outlet
If the system comes with a fax/modem board, connect it to
the telephone line as follows:
Unplug the telephone from the telephone jack on the
wall.
Plug the telephone cable that comes with the system
into the line jack on the system and into the telephone
jack on the wall.
Plug the cable on the telephone into the phone jack on
the system.
If you connect to a network, connect the network line to
the RJ-45 connector on the rear of the system unit. See the
network administrator for guidelines on configuring the
system for network access.
If you have a printer, connect the printer cable to the
printer port on the rear of the system unit. Secure the cable
with the screws provided. Connect the other end to the
printer.
If you have a serial device, connect one end of the serial
cable to the serial port on the rear of the computer. Secure
the cable with the screws provided. Connect the other end
to the serial device.
If you have a USB device, connect one end of the USB
cable to the USB port on the rear of the computer. Connect
the other end to the USB device. See the documentation
that comes with the device to connect additional USB
devices.
