3-34 Configuring the System
After the OS finishes loading, the “Operating System
Restore Completed” screen appears.
8.
Remove the CD from the CD tray.
9.
Click
OK
to reboot.
This completes the Auto Rebuild and Restore procedure.
To reinstall any of the applications or device drivers that
came with the computer, follow the procedures in “Installing
Applications.”
To install device drivers that did not come with your
computer, follow the procedures in “NEC Driver CD.”
Custom Rebuild and Restore
To perform a custom OS Restore with choices on
repartitioning and/or reformatting the hard drive, boot the
system from the Select Install CD. When the system boots
from the CD, it automatically loads the MS-DOS-based
Operating System Restore program.
!
CAUTION
If possible, back up your data before performing
an OS restore.
Follow these steps to perform a customized restore of your
original, factory-installed operating system using OS Restore:
1.
Power on or restart the system and immediately insert the
Select Install disc into the CD-ROM drive.
