5-42 Installing Options
Installing a 5 1/4-Inch Device
Use the following procedure to install a 5 1/4-inch device into
a 5 1/4-inch accessible device slot.
Note:
A 3 1/2-inch hard drive can also be
installed in a 5 1/4-inch accessible device slot.
Place the device in a 5 1/4-inch frame adapter
and then follow the instructions in this section.
1.
Follow the preinstallation instructions that come with
your device, such as setting jumpers and switches.
See “Preparing the Device” for device preparation
information.
2.
Remove the system unit cover (see “Removing the
Cover”).
3.
Remove the front panel (see “Removing the Front
Panel”).
4.
From the front of the system, insert the device, connector
end first, into the device slot (see the following figure).
