NEC PD78212, User Manual

Page: 261 / 487

232
µ
PD78214 Sub-Series
(3) A/D conversion time
The time required for A/D conversion is determined by the system clock frequency (f
CLK
) and the FR bit of the
ADM register. To maintain A/D conversion accuracy above a certain level, it is necessary to set the FR bit as
listed in Table 8-2 according to the system clock frequency.
This A/D conversion time includes all the time required for one A/D conversion sequence and the sampling
time.
Table 8-2 shows the conversion time and sampling time.
Table 8-2 A/D Conversion Time
4 MHz < f
CLK
≤
6 MHz
2 MHz
≤
f
CLK
≤
4 MHz
0
1
180/f
CLK
(30
µ
s to 45
µ
s)
120/f
CLK
(30
µ
s to 60
µ
s)
36/f
CLK
(6
µ
s to 9
µ
s)
24/f
CLK
(6
µ
s to 12
µ
s)
System clock (f
CLK
)
range
FR bit Conversion time Sampling time
8.3.2 Select Mode
Bits 1 through 3 (ANI0 through ANI2) of the ADM register specify one analog input pin. A/D conversion is repeated
for the specified pin. The resultant digital data is stored in the A/D conversion result register (ADCR).
If bit 6 (TRG) of the ADM register is set to enable an external trigger, an A/D conversion end interrupt request
(INTAD) is generated.
Fig. 8-6 Select Mode Operation Timing
(a) TRG bit
←
0
A/D
conversion
Conversion starts
CS
←
1
MS
←
1
ANI2-0
←
011
ADCR
AN3 AN3 AN3
AN3 AN3 AN3 AN3
AN3 AN3
AN3
AN3
(b) TRG bit
←
1
AN0
AN0 AN0 AN0
Conversion starts
AN0 AN0 AN0 AN0 AN0 AN0
CS
←
1
MS
←
1
ANI2-0
←
000
AN0
Initialization
Initialization Initialization
INTP5
A/D
conversion
ADCR
INTAD
Conversion
end Conversion
end Conversion
end Conversion
end Conversion
end