NEC N8100-1575F, User Manual, Page: 99 / 378

Configuring Your Server 4-23
BMC LAN Configuration Submenu
Option Parameter Description Your Setting
Shared BMC LAN [Disabled]
Enabled Set to "Disabled" if the
management LAN port is used for
management LAN.
Change to "Enabled" to use the
LAN port 2 for management LAN.
If set to "Enabled", the
management LAN port becomes
unavailable.
LAN Connection
Type [Auto Negotiation]
100Mbps Full Duplex
100Mbps Half Duplex
10Mbps Full Duplex
10Mbps Half Duplex Specify the connection type for
management LAN port.
IP Address [192.168.001.001] Specify an IP address for
management LAN.
Subnet Mask [255.255.255.000] Specify a subnet mask for
management LAN.
Default Gateway [000.000.000.000] Specify a default gateway for
management LAN.
DHCP [Disabled]
Enabled Set to [Enabled] to obtain an IP
address from DHCP server
automatically. If you intend to
specify an IP address manually,
set to [Disabled].
Web Interface – –
HTTP [Disabled]
Enabled Set to [Enabled] to use HTTP
communication for Web interface.
HTTP Port
Number [80] Specify the TCP port number
which the management LAN uses
for HTTP communication.
HTTPS [Disabled]
Enabled Set to [Enabled] to use HTTPS
communication for Web interface.
HTTPS Port
Number [443] Specify the TCP port number
which the management LAN uses
for HTTPS communication.
Command Line
Interface – –
Telnet [Disabled]
Enabled Set to [Enabled] to use Telnet
communication as a command line
interface.
Telnet Port
Number [23] Specify the TCP port number to be
used for Telnet communication.
SSH [Disabled]
Enabled Set to [Enabled] to use SSH
communication as a command line
interface.
SSH Port Number [22] Specify the TCP port number to be
used for SSH communication.
Clear BMC
Configuration [Enter] Press Enter and select "Yes" to
initialize the BMC configuration.
[ ]: Factory-set