NEC N8100-1575F, User Manual, Page: 96 / 378

4-20 Configuring Your Server
Option Parameter Description Your Setting
Power ON Delay
Time (Sec) [20] - 255 Specify the power on delay time within
the range between 20 and 255
seconds. The specified time is valid
when "Power On" or "Last State" is
specified for AC LINK.
Platform Event
Filtering Disabled
[Enabled] Specify whether to enable or disable
the platform event filtering (PEF)
feature.
[ ]: Factory-set
IMPORTANT:
To power on the server from the UPS (Uninterruptible
Power Supply), select [Server] - [AC LINK] - [Power On].
The table below shows the operation when the AC power to the server is turn off once and then on
again, depending on the setting of "AC LINK."
Setting of AC LINK
System status before AC power off
Stay Off Last State Power On
Operating Off On On
Aborting (DC power being off also) Off Off On
Forced shutdown Off Off On
* Press the power switch continuously for four seconds or longer. This forcibly turns off the power.