![background image](http://html1.mh-extra.com/html/nec/n8100-1575f/n8100-1575f_user-manual_4244162320.webp)
11-6 Upgrading Your Server
DEVICE INSTALLATION OR REMOVAL PROCEDURE
Install or remove a component from the server in the following procedure.
Hard Disk Drive
3.5-inch Hard Disk Drive Model
The server can contain up to four 3.5-inch hard disk drives.
2.5-inch Hard Disk Drive Model
The server can contain up to eight 2.5-inch hard disk drives.
IMPORTANT:
Do not use any hard disk drives that are not authorized by NEC.
Installing a third-party hard disk drive may cause a failure of the
server as well as the hard disk drive.
All hard disk drives must accept the same interface.
Slot 0
For first hard disk
drive (option)
Slot 1
For second hard
disk drive (option)
Slot 3
For fourth hard
disk drive (option)
Slot 2
For third hard disk
drive (option)
Slot 5
For sixth hard
disk drive (option)
Slot 4
For fifth hard disk
drive (option)
Slot 7
For eighth hard
disk drive (option)
Slot 6
For seventh hard
disk drive (option)
Slot 0
For first hard disk drive
(option)
Slot 1
For second hard disk
drive (option)
Slot 2
For third hard disk drive
(option)
Slot 3
For fourth hard disk
drive (option)
Summary of Contents for N8100-1575F
