NEC N8100-1575F, User Manual, Page: 93 / 378

Configuring Your Server 4-17
Option Parameter Description Your Setting
Power Switch
Inhibit
[Disabled]
Enabled
Specify whether to enable or disable
the power switch feature.
(Forced shutdown (pressing the
POWER switch for at least four
seconds) feature is always
acceptable to the server.
Disable USB
Ports [Disabled]
Front
Rear
Internal
Front + Rear
Front + Internal
Rear + Internal
Front + Rear + Internal Select the USB port to be disabled
or enabled.
[ ]: Factory-set
Security Chip Configuration Submenu
Option Parameter Description Your Setting
TPM Support [Disabled]
Enabled Disables or enables TPM feature.
This option is selectable only when
the supervisor password is set.
Current TPM
State – Displays the current TPM state.
This option is displayed only when
"TPM Support" is set to "Enabled".
Change TPM
State [No Change]
Enable & Activate
Deactivate & Disable
Clear Changes TPM state.
This option is displayed and
selectable only when "TPM
Support" is set to "Enabled".
[ ]: Factory-set