NEC N8100-1575F, User Manual

Page: 298 / 378

10-30 Troubleshooting
The system displays the message below and fails to log on:
Windows Product Activation
This copy of Windows must be activated with Microsoft before you can
continue. You cannot log on until you activate Windows.
To shut down the computer, click Cancel.
YES NO Cancel
→
In Windows Server 2003, the above message will be displayed if you use the
operating system without executing the license authentication. Select "Yes", and
execute the procedure for license authentication.
Cannot install the operating system correctly:
‰
Did you confirm the notes on installing the operating system?
→
See Chapter 5, 6, or 7.
Fail to start the OS with the /3GB switch
→
System often fails to start the OS with the /3GB switch.
In this case, please adjust the capacity of the user mode area using the /userva
switch in reference to the following URL.
http://support.microsoft.com/kb/316739/en
During installation, the following warning is registered in the System Log of the
Event Viewer:
Error detected on the device \Device\CdRom0
during the paging operation.
→
There is no problem on this issue.
Fail to start the OS:
‰
Is a floppy disk in the floppy disk drive?
→
Take out the floppy disk and restart the server.
‰
Is the NEC EXPRESSBUILDER DVD in the optical disk drive?
→
Take out the NEC EXPRESSBUILDER DVD and restart the server.
‰
Is the OS broken?
→
Use recovery process to recover the system.