NEC N8100-1575F, User Manual

Page: 95 / 378

Configuring Your Server 4-19
Server
Option Parameter Description Your Setting
Assert NMI on
PERR Disabled
[Enabled] Specify whether to support PCI PERR
or not.
Assert NMI on
SERR Disabled
[Enabled] Specify whether to support PCI SERR
or not.
FRB-2 Policy Disable FRB2 Timer
[Retry 3 Times]
Always Reset Specify whether the processor is
disabled or not when FRB level 2 error
occurred in BSP.
Boot Monitoring [Disabled]
5 Minutes
10 minutes
15 minutes
20 minutes
25 minutes
30 minutes
35 minutes
40 minutes
45 minutes
50 minutes
55 minutes
60 minutes Specify whether to enable or disable
the boot monitoring function on
booting, or select the time limit for
timeout.
To use this function, install NEC
ESMPRO Agent. Set this item to
"Disabled" if the system is booted from
OS without installation of NEC
ESMPRO Agent.
Boot Monitoring
Policy [Retry 3 Times]
Always Reset Specify the processing at the
occurrence of timeout during boot
monitoring.
If [Retry 3 times] is selected, the
system is reset after the occurrence of
timeout and OS boot is retried up to
three times.
If [Always Reset] is selected, the
system is reset after the occurrence of
timeout and OS boot is retried
repeatedly.
* If no service partition exists in the
system, OS boot is retried
repeatedly from the system
partition.
Thermal Sensor Disabled
[Enabled] Specify whether to enable or disable
the thermal sensor monitoring
function. If a thermal error is detected
with this item being set to "Enabled",
the system stops at the end of POST.
BMC IRQ Disabled
[IRQ 11] Specify whether to assign IRQ for
BMC.
Post Error Pause Disabled
[Enabled]
Specify whether to stop the POST
once at the end of POST if an error
occurs during the POST.
AC-LINK Stay Off
[Last State]
Power On Specify the state of power when the
AC power to the server is turn off once
and then on.