NEC N8100-1575F, User Manual, Page: 144 / 378

5-16 Installing Windows Server 2008
5) Change the password, and then click the button.
NOTE: Administrator password that satisfy the next condition, are
required.
„
More than 6 characters
„
Contains characters from three of the following categories
(numbers, uppercase letters, lowercase letters, and signs).
6) When the following message appears, click [OK].
7) At the command prompt, enter user information.
NOTE: For more detailed procedure, see the "Microsoft Windows
Server 2008 Step-By-Step Guide".
After installations is completed, be sure to execute the tasks described in "Setup of Device Driver
(Normally Install in Server)" and "Updating the System" of this chapter.