NEC N8100-1575F, User Manual, Page: 73 / 378

Setting Up Your Server 3-19
TURNING ON THE SERVER
Pressing the POWER switch at the front of the server turns on the server.
1.
Make sure that the floppy disk drive (if connected) contains no floppy disk.
2.
Power on the video display and any other external devices.
NOTE:
If the power cord is connected to the power control unit such
as the UPS, turn on the power control unit.
3.
Press the POWER switch.
The POWER LEDs on the front and the rear of the server come on green. In a few
seconds, the NEC logo appears on the screen.
NOTE:
Connect the power cord and wait about five seconds before
pressing the POWER switch. The POWER switch does not work in a
few seconds after connecting the power cord due to firmware start-up.
POWER switch
POWER LED
POWER switch
POWER LED
3.5-inch hard disk drive model
2.5-inch hard disk drive model