NEC N8100-1575F, User Manual, Page: 26 / 378

1-10 Notes on Using Your Server
CAUTION
Do not connect any interface cable with the power cord of the server plugged
to a power source.
Make sure to power off the server and unplug the power cord from a power
outlet before connecting/disconnecting any interface cable to/from the server.
If the server is off-powered but its power cord is plugged to a power source,
touching an internal device, cable, or connector may cause an electric shock
or a fire resulted from a short circuit.
Do not use any unauthorized interface cable.
Use only interface cables provided by NEC and locate a proper device and
connector before connecting a cable. Using an authorized cable or
connecting a cable to an improper destination may cause a short circuit,
resulting in a fire.
Also, observe the following notes on using and connecting an interface cable.
„
Do not use any damaged cable connector.
„
Do not step on the cable.
„
Do not place any object on the cable.
„
Do not use the server with loose cable connections.