NEC N8100-1575F, User Manual, Page: 135 / 378

Installing Windows Server 2008 5-7
INSTALLING Windows Server 2008
Preparations for Installation
„
NEC EXPRESSBUILDER DVD
„
Microsoft Windows Server 2008 Standard (DVD-ROM)
„
User's Guide
„
Getting Started
„
Windows Server 2008 OEM-Disk for EXPRESSBUILDER
Windows Server 2008 Clean Installation
This section explains how to perform a clean installation of Windows Server 2008.
IMPORTANT:
The installation procedure depends on your
environment.
Follow steps below appropriate to your environment.
1.
Turn on your system.
IMPORTANT:
To install Windows Server 2008, you may need to
update BIOS. To check if your system needs a BIOS update, go to:
http://www.nec.com/express/.
2.
Insert the Windows Server 2008 DVD-ROM into your DVD-ROM drive.
3.
Restart the system.
To restart the system, press
Ctrl + Alt + Del or turn off the system once, and then turn it
on again.
IMPORTANT:
When prompted to [press any key to boot from CD or
DVD], press
Enter
while the message is displayed. If the Windows
installation screen (shown in step 4) does not appear, turn off the system,
and then turn it on again.
The DVD-ROM starts. A message "Windows is loading files …" appears.