NEC N8100-1220F, User Manual

Page: 89 / 494

Setting Up Your Server 3-13
NOTE:
The slide rail assembly installed in the rack contains a slide
rail called the bearing rail. The bearing rail can be moved freely in the
slide rail assembly. To install the server in the rack securely, slide the
bearing rail to the front of the rack to put the plastic components at the
tip of the rail and the inner rail into the server.
At the first installation, you may feel strong friction in pushing because the mechanical
components cannot be completely engaged with each other. Push the server intensely.
NOTE:
While the server is pushed into the rack, the server may be
locked and thus cannot be pushed any more. This is because the lock
lever on the rail prohibits the server from being pushed into the rack
any more. Set the lock lever to be on the level to release the lock and
then push the server into the rack slowly.
8.
Install the cable arm on the rear of the server with two screws (B).
Screws (B)