General Description 2-37
NOTE:
Use of the CD/DVD-ROM
Keep the following notes in mind to use the CD/DVD-ROM for the
server:
For the disk which does not conform to the CD/DVD standard, the
playback of such a disk with the DVD drive is not guaranteed.
Do not drop the CD/DVD-ROM.
Do not place anything on the CD/DVD-ROM or bend the CD/DVD-
ROM.
Do not attach any label onto the CD/DVD-ROM.
Do not touch the signal side (nothing is printed on this side) with
your hand.
Place the CD/DVD-ROM with its printed side upward and gently
put it on the tray.
Do not scratch the CD/DVD-ROM or write anything directly on it
with a pencil or ball-point pen.
Keep the CD/DVD-ROM away from cigarette smoke.
Do not leave the CD/DVD-ROM in a high-temperature place (e.g.,
place exposed to direct sunlight or close to a heater).
When dust or fingerprints are attached on the CD/DVD-ROM, wipe
the CD/DVD-ROM from its center to edge with a dry soft cloth
slowly and gently.
Use the CD cleaner to clean the CD/DVD-ROM. Do not use
record spray/cleaner, benzene, or thinner.
Keep the CD/DVD-ROM in a CD/DVD-ROM case when not in use.
If the CD/DVD-ROM emits large noise in the DVD-ROM drive,
remove the CD/DVD-ROM and insert it back again.
Summary of Contents for N8100-1220F
