NEC Express5800/T120f Maintenance Manual Download Page 35

Page: 35 / 221

5. Troubleshooting

Express5800/R120f-2E, T120f Maintenance Guide

Chapter 1 Maintenance

5.4

Problem of Starting OS

[?]

Unable to start OS



Have the settings of the RAID controller changed?

→

Specify the correct settings with RAID Configuration Utility (Off-line Utility or LSI Software RAID

Configuration Utility).



Is the RAID controller found by POST?

→

Be sure to connect the RAID controller correctly and retry.



Is the RAID controller installed firmly straight into the PCI slot?

→

Install the RAID controller properly.



Is the RAID controller mounted on the PCI slot for which the mounting is restricted?

→

Check the mounting restrictions of the server and then mount the RAID controller on the correct slot.



Are the hard disk drives properly installed?

→

Install the hard disk drives properly.



Is the SAS cable connected to the hard disk drive correctly?

→

Connect the SAS cable properly.



Is the EXPRESSBUILDER DVD inserted?

→

Remove the EXPRESSBUILDER DVD and restart.



Is a cartridge inserted into N8151-86 with built-in RDX (USB)?

→

Either remove the cartridge or change the boot order in BIOS Setup.



Is a disk array unit connected to the PCI card?

→

Change the boot order from BBS Priorities of the BIOS Setup Utility.

Summary of Contents for Express5800/T120f






























































































































































































































Search results

Summary of Contents for Express5800/T120f

Reviews:

Related manuals for Express5800/T120f

Brands by name

Popular brands

NEC Express5800/T120f, Maintenance Manual

Search results

Summary of Contents for Express5800/T120f

Reviews:

Related manuals for Express5800/T120f

Brands by name

Popular brands