1. System BIOS
Express5800/R120f-2E, T120f Maintenance Guide
67
Chapter 2 Useful Features
(2)
Memory Configuration submenu
From the
Advanced
menu, select
Memory Configuration
and then press the <Enter> key to display the menu
screen shown below. For the menu that has on the left, move the cursor to it and then press the <Enter> key
to show its submenus.
For details about the options, see the table below.
Option
Parameter
Description
Memory Information
−
−
Hardware Memory Test
[Disabled]
Enabled
Enable or disable execution of memory test
during POST.
If a memory error is detected while this option
is set to "Enabled", the relevant memory
resource is degraded.
Memory Retest
[No]
Yes
When this option is set to "Yes", error
information on memory is cleared, and all
DIMMs are reconfigured at the next startup.
"No" is automatically selected after DIMMs are
reconfigured.
Memory Frequency Limit
[Auto]
1333 MHz
1600 MHz
1866 MHz
2133 MHz
Specify the upper limit of operating frequency
of memory. The operating frequency may be
lowered than the specified value depending on
memory configuration.
NUMA
Disabled
[Enabled]
Enable or disable the Non-Uniform Memory
Access feature. This option is displayed only
in multi-processor configuration.
Cluster On Die
[Disabled]
Enabled
Enable or disable the Cluster On Die feature.
This option is available when
Enabled
is
selected for
NUMA
and the installed processor
supports this feature.
Note: If you are using VMware ESXi 5.5
Update 2, this option must be
Disabled
.
