7. Resetting and Clearing the Server
Express5800/R120f-2E, T120f Maintenance Guide
46
Chapter 1 Maintenance
7.
Resetting and Clearing the Server
See this section if the server does not work or if you want to set the BIOS settings back to the factory settings.
7.1
Software Reset
If the server halts before starting the OS, press <Ctrl> + <Alt> + <Delete> keys. Resetting the server clears the
data in memory and restarts the server.
Note
Make sure that no processing is in progress when resetting the server.
7.2
BMC Reset
Press BMC RESET Switch only if a problem occurs in EXPRESSSCOPE Engine 3 (BMC).
Do not press this switch usually.
To reset the BMC, press BMC RESET Switch at least five seconds. The remote management feature is
disabled for about three minutes after the BMC is reset. While the BMC is being initialized, STATUS LED 1
and 2 light green and amber simultaneously.
Note
Do not shut down, restart the server, or perform any switch operation after pressing
BMC RESET Switch for at least three minutes.
Tips
BMC RESET Switch only resets the BMC and does not restart the server.
