2. Server Configuration
Express5800/R120f-2E, T120f Maintenance Guide
113
Chapter 2 Useful Features
(2/2)
Item
Description
Default Value
Configuration
Power Threshold(Pn)
Specify power threshold in Non-Aggressive Mode. Allowable range is between
the Minimum Power Consumption and BBB (Watt).
*5
*6
The larger value
comparing with
Power
Threshold(Pa) –10
and Minimum
Power Consumption
+10
Correction time limit
When power consumption exceeds the power threshold for Non-Aggressive
Mode and unable to recover within the time period specified in this parameter,
collects event log and sends an alert. Allowable value (in seconds) depends on
system.
*5
The larger value
comparing with 10
and Minimum
system value
Safe Power Capping
*3
Enable or disable Safe Power Capping (Monitoring at unreadable power
consumption).
Disable
Boot Time
Configuration
*3
Enable or disable Boot Time Configuration.
Disable
Performance Mode
Select a performance at system boot-up.
*7
Performance Optimized
: Prefer performance and operation
Power Optimized
: Optimize power consumption.
Performance
Optimized
Disable CPU Cores
Specify the number of cores to be disabled. Allowable value is between 0 and
(Number of maximum cores –1).
*7
0
*1:
These values are reference purpose only. Each value might be different from the actual value which depends on your
system configuration.
*2:
Technology that decreases frequency or duty cycle of clock, and suppresses power consumption.
*3:
Can be specified only when Aggressive Mode is set to "Enable".
*4:
AAA denotes "Minimum Power Consumption" or "Power Threshold (Pn)".
*5:
Can be specified only when Non-Aggressive Mode is set to "Enable".
*6:
BBB denotes "Maximum Power Consumption" or "Power Threshold (Pa)".
*7:
Can be specified only when Boot Time Configuration is set to "Enable".
Note
•
The power value may not reach the threshold value. The power control feature saves
power consumption by lowering the clock speed of CPU/memory. If the throttling value
of CPU/memory reaches 100%, the power value cannot be reduced no longer.
•
If the value specified for Power Threshold (Pa) for Aggressive Mode is lower than the
power required for system startup and the parameter "Shutdown System" is enabled,
the server might not start normally.
