6. Details of EXPRESSBUILDER
Express5800/R120f-2E, T120f Maintenance Guide
176
Chapter 2 Useful Features
6.3
Utilities in EXPRESSBUILDER
You can run the following utilities when choosing
Utilities
from Home Menu.
(1) Starter Pack installation (available only on Internal Flash Memory)
Installs Starter Pack to the installed Windows. Starter Pack is usually installed from
Setup
of Home Menu or
Autorun Menu. Use this feature to install Windows manually without EXPRESSBUILDER DVD.
(2) RAID Configuration Data
Saves or loads the configuration data on a RAID controller.
(3) File Execution
Directly runs an external utility on removal media.
Use this feature only for utilities provided by NEC
.
Note
Do not run the file provided by a third party.
(4) Internal Flash Memory (available only on DVD)
Manages Internal Flash Memory with the following commands.
a) Initialize
Clears the data in Internal Flash Memory and initializes (formats) it.
Note that
all data in Internal Flash Memory is deleted
b) Update
.
Copies the data of the EXPRESSBUILDER DVD or other media to Internal Flash Memory.
The data is overwritten and
all previous data is cleared
.
Tips
•
The parameter file and RAID configuration data are retained.
•
For the removable media in which the parameter file is saved,
see "/mnt /usr_connect /usb*" (* indicates a number).
6.4
CLI for EXPRESSBUILDER
You can operate EXPRESSBUILDER by using Command Line Interface (CLI) on Windows command prompt.
See EXPRESSBUILDER Command Line Interface User's Guide for details.
