NEC Express5800/120Rf-1, User Manual

Page: 88 / 408

3-14 Setting Up Your Server
Removing the Server from the Rack Assembly
The server should be removed from the rack by at least two persons.
WARNING
Observe the following instructions to use the server safely. Failure to follow
these instructions may result in death or serious personal injury. See pages
1-3 to 1-8 for details.
„
Do not lift the server only by a single person.
„
Do not pinch your finger with mechanical components.
„
Note high temperature.
„
Do not pull out a device from the rack if the rack is unstable.
„
Do not leave more than one device being pulled out from the rack.
1.
Release the security lock to remove the front bezel.
2.
Confirm that the power of the server is OFF, and disconnect the power cable and all the
interface cables connected to the server.
3.
<This step is required only when the optional cable arm is mounted.>
Remove the two screws securing the cable arm, and dismount the cable arm from the
server.
4.
Loosen the two captive thumb screws.
Security lock