![background image](http://html.mh-extra.com/html/nec/express5800-120rf-1/express5800-120rf-1_user-manual_251202313.webp)
Upgrading Your Server 9-27
Installation
Take the following steps to install the CPU.
1.
See the section "Preparing for Installation and Removal" described earlier to prepare.
2.
Pull out the server from the rack.
3.
Open the drive cover and logic cover.
4.
Remove two screws securing the support arm.
5.
Remove the support arm from the chassis.
6.
Remove the processor duct from the chassis.
7.
Locate the CPU socket which you are going to install CPU.
8.
Raise the locking lever on the socket.
IMPORTANT:
Open the lever until it stops. The bar can be opened to
approx. 120 degrees.
Summary of Contents for Express5800/120Rf-1
