NEC Express5800/120Rf-1, User Manual

Page: 203 / 408

Installing the Operating System with Express Setup 5-49
Updating the System - Installing Service Pack -
IMPORTANT: This system does not support Windows 2000 Service
Pack 1 - 3.
If you install Windows 2000 CD-ROM which contains Service Pack 4
to your system, you do not have to apply Service Pack 4 again.
Update the system in the situation below:
„
Modified system configuration.
„
Recovered the system using recovery process.
Log on to the system with the account that has administrative authority (e.g. Administrator) and
insert the NEC EXPRESSBUILDER CD-ROM into the CD-ROM drive of the server.
[Setup] in [Master Control Menu] screen appears, so left-click the item. Click [Update the
System] from the menu and the setup will start. After that, follow the message to continue the
setup process and apply Service Pack.
Making Backup Copies of System Information
The system information includes the current BIOS settings and any specific information for the
server.
Save the information after completing the system setup.
Without the backup data, you will not be able to recover the information.
You can save the information by the following process.
1.
Insert the NEC EXPRESSBUILDER CD-ROM into the CD-ROM drive and reboot the
system.
2.
Select [Tools].
3.
Select [Off-line Maintenance Utility].
4.
Select [System Information Management].
5.
Insert a floppy disk into the floppy disk drive.
6.
Select [Save].