NEC Express5800/120Rf-1, User Manual

Page: 47 / 408

General Description 2-15
STANDARD FEATURES
High performance Expandability
„ Intel

Xeon

processor
„ High-speed network interface
(1000Mbps/100Mbps/10Mbps supported)
„ High-speed disk access
(Ultra320 SCSI or SATA)
„ High-speed memory access (DDR2-400)
„ One 64-bit/133MHz PCI-X and one 64-
bit/66MHz PCI-X
„ Large memory of up to 16 GB
„ Three hot-swap SCSI hard disk drive
bays
*1
„ Up to two multi-processors are available
for upgrade.
„ USB interface (A USB-support driver is
required.)
„ Two network ports
High-reliability Many Available Features
„ Graphic accelerator "RADEON 7000"
support
„ El Torito Bootable CD-ROM (no
emulation mode) format support
„ POWER switch mask
„ Software power-off
„ Remote power-on feature
„ AC-Link feature
„ Consoleless feature
Self-diagnosis
„ Memory monitoring feature (error
correction/error detection)
„ CPU/memory degradation feature (logical
isolation of a failed device)
„ Memory chip kill
„ Bus parity error detection
„ Temperature detection
„ Error notification
„ Internal fan monitoring feature
„
Internal voltage monitoring feature
„ Auto-rebuild feature (optional, hot-
swappable)
„ BIOS password feature
„ Mechanical security lock
„ Onboard RAID controller
„ Redundant fans (option)
„ Redundant power supply
„ Remote Management Card (RMC)
„
Power On Self-Test (POST)
„ Test and Diagnosis (T&D)
Management Utilities Easy and Fine Setup
„ NEC ESMPRO
„ NEC DianaScope
Maintenance Features
„ Off-line Maintenance Utility
„ Memory dump feature using the DUMP
switch
„ NEC EXPRESSBUILDER (system setup
utility)
„ Configuration Parameter Diskette Creator
„ SETUP (BIOS setup utility)
„ SCSI Select (SCSI device RAID
configuration *1 utility)
„ Array configuration
*2
*1 SCSI hot-plug hard disk drive model
*2 SATA fixed hard disk drive model