4. Names and Functions of Parts
Express5800/R120h-1M User’s Guide
37
Chapter 1 General Description
*2 The power is not supplied, the power cord is not connected, the power supply unit is not installed, the
power supply unit is defect, or the power cord is disconnected.
*3 If the STATUS LED indicates a degraded or critical condition, check the system IML or use iLO to check
the system status.
・
3.5-inch drive model
No.
Item
Status
Description
1 UID
switch/LED
*1
Lights in blue
Working in operation
Flashes in blue (once per
second)
Remote management or firmware
upgrade is in progress
Flashes in blue (4 times
per second)
The iLO restart sequence using the UID
switch has been launched
Flashes in blue (8 times
per second)
The iLO restart sequence using UID
switch is in progress
Lights off
Not working
2 LINK/ACT
LED
*1
Lights in green
Linked to the network
Flashes in green (once per
second)
The network is working
Lights off
The network is not working
3 STATUS
LED
*1
Lights in green
Normal state
Flashes in green (once per
second)
Restarting iLO
Flashes in amber
The function of the system is deteriorating
Flashes in red (once per
second)
The system is in a critical state
*3
4 POWER
Switch/LED
*1
Lights in green
The system is powered on
Flashes in green (once per
second)
The power on sequence in progress
Lights in amber
The system is in standby state
Lights off
Power is not supplied
*2
*1 If all the four LEDs described in this table is flashing at the same time, it indicates that a power failure has
occurred. For details, refer to
(2) Power failure LED
.
*2 The power is not supplied, the power cord is not connected, the power supply unit is not installed, the
power supply unit is defect, or the power cord is disconnected.
