2. Installation and Connection
Express5800/R120h-1M User’s Guide
182
Chapter 2 Preparations
Note the following precautions to connect cables.
When the device is not Plug and Play device, turn off the server and devices to be connected before
connecting.
If connecting any peripheral device and its interface cable made by other companies (a third party), contact
your sales representative to check if they can be used with the server beforehand.
Fix the power cord or interface cable with cable ties.
Make sure that no pressure is applied on the plug of power cord.
Connecting to Uninterruptible Power Supply (UPS)
To connect the power cord of the server to a UPS, use the connector output on the rear of the UPS. For details,
refer to the manual supplied with the UPS.
When the power cord is connected to a UPS, change the settings from System Utility in order to link the server
with the power supply from the UPS.
To change the settings, select
System Configuration
>
BIOS/Platform Configuration (RBSU)
>
System
Options
>
Server Availability
>
Automatic Power-On
. Select
Always Power On
to perform automatic
operations by using the UPS. For details, see
Chapter 3 (2. Description on System Utility))
.
Option slot
Universal Serial Bus (USB) port
Overload protection
reset button
Connector outputs
Input connector
(NEMA5-15P)
Voltage sensitivity setting button
Computer interface port (COM)
TVSS device connector
Example
