1. Installing Internal Optional Devices
Express5800/R120h-1M User’s Guide
154
Chapter 2 Preparations
Installing a SAS or SATA drive
Install a hard disk drive by using the following procedure.
Note
In the RAID System, use hard disk drives that have the same specifications
(capacity, rotational speed, and standard) for each Disk Array.
See
Chapter 2 (1.2 Overview of Installation and Removal)
for preparations.
Locate the slot where you install the hard disk drive.
Install hard disk drives in ascending order of port number.
Remove the dummy tray.
Dummy trays are installed in every slot.
Note
Keep the removed dummy trays for future use.
Prepare the drive.
Unlock the handle of the tray.
Hold the tray firmly and insert it into the slot.
Note
Push it all the way until the handle’s lock touches the frame.
Hold the tray firmly with both hands.
Slowly close the handle.
The tray is locked making a clicking sound.
Note
When you push the drive into the slot, confirm the handle got hooked on the
frame.
Confirm the status of the drive from the combination of the LEDs of the drive.
