1. Installing Internal Optional Devices
Express5800/R120h-1M User’s Guide
155
Chapter 2 Preparations
Removing Hot Plug Compatible SAS/SATA driver
Note
To ensure adequate cooling effect, top cover, baffle, expansion slot cover, and
blank should be installed for server operation.
If the server supports the hot-pluggable components, please minimize the
opening time of the top cover.
1.
Confirm the status of the drive from the combination of the LEDs of the hot-plug SAS drive.
2.
Back up all server data in the drive.
3.
Unlock the handle of the tray.
Grasp the handle and slowly pull it to remove the drive.
If you transfer or dispose of the removed hard disk drive, see Chapter 1 (1. Relocation and Storage) in
“Maintenance Guide” to erase data.
Important NEC assumes no liability for data leakage should the product be transferred
to a third party without erasing the data.
Note
The saved boot order is cleared when a hard disk drive is added.
