2. Description on System Utility
Express5800/R120h-1M User’s Guide
191
Chapter 3 Setup
2.2
Starting SETUP Utility
Run POST following
Chapter 3 (1.1.1 POST sequence)
.
After a while, the following message is displayed on the screen. (The on-screen message depends on your
environment.)
By pressing <F9> Key here, System Utility starts after POST is completed.
Furthermore, if an Admin Password has been set, a dialog box for password input will be displayed before
starting the system utility. Please enter the correct Admin Password.
You can enter password three times.
If you enter wrong passwords three times in a row, further entry
of password is rejected.
To enter password again, reboot the server.
To save your change in System Utility and exit, press <F12> Key (F12: Save and Exit). In case you cancel your
change and exit, press <ESC> Key (Exit).
Tips
To put the setting back to the default values, press <F7> Key (F7: Load
Defaults).
The default value might be different from the factory setting.
iSCSI Configuration
menu in
Network Options
menu cannot be put
back to the default values.
The default language of System Utility is English.
