1. Turning on the Server
Express5800/R120h-1M User’s Guide
189
Chapter 3 Setup
3.
After a while, the following message is displayed on the screen. (The on-screen message depends
on your environment.)
By pressing the function key following messages, you can call the functions below upon completion of
POST.
<F9> key:
Start System Utility. See
Chapter 3 (2 Description on System Utility)
.
<F10> key:
Run EXPRESSBUILDER. For details, see
Chapter 3 (4. EXPRESSBUILDER and
Starter Pack)
.
<F11> key:
Start Boot Menu. See
Chapter 3 (2 Description on System Utility)
.
<F12> key:
Boot from network.
Regarding designated utilities, see instruction documents attached to each option board.
Necessary key inputs are different depending on option boards installed, so you are requested to
operate according to messages.
4.
The OS starts when POST is completed.
Tips
When no bootable device is connected, the following message is
displayed by terminating POST.
‑
No bootable devices ware detected
‑
Please attach a UEFI bootable device.
‑
System will automatically retry the UEFI Boot Order in x seconds.
POST error messages
When POST detects an error, it displays an error message on the screen. For descriptions of error messages,
causes, and countermeasures, see
Chapter 3 (1. IML Error Message)
in "
Maintenance Guide
".
Note
Tell the indication displayed on display unit your sales representative.
Alarm messages are useful information for maintenance.
