1. Specifications
Express5800/R120h-1M User’s Guide
212
Chapter 4 Appendix
1.
Specifications
Part Number
N8100-2557F
N8100-2558F
N8100-2561F
CPU
On-board CPU, operation
frequency
Number of cores (C)/
threads (T) (1CPU)
Intel Smart Cache (Last
level cache)
See the attached file
“
On-board CPU
”
Number of standard
installation/ maximum
installation
0/2
Chipset
Intel
®
C621 Chipset
Memory
On-board capacity
standard/ maximum
Not included in Standard Installation/ (Option)
Registered DIMM: 768GB (24x 32GB), Load Reduced DIMM: 3.0TB (24x 128GB)
On-board Memory
DDR4-2666 Registered DIMM (8/16/32GB), DDR4-2666 Load Reduced DIMM (64/128GB)
Maximum operation
frequency
2666MHz (See
System Configuration Guide
regarding the maximum operation frequency of each CPU)
Error Detection and
Correction
ECC, x4 SDDC
Memory sparing
Capable
Memory mirroring
Capable
Secondary
memory
device
Drive
bay
Built
-in
slot
Front
8x2.5 inch drive
2x2.5 inch additional drive
(maximum one)
10 x 2.5 inch drive
4x3.5 inch drive
Rear
1x 2.5 inch drive (maximum one)
Interna
l parts
2x M.2 SATA slots
Built-in
standard
－
Maximum
built-in
2.5 inch HDD: SATA 22TB (11x
2TB),
SAS 19.8TB (11x 1.8TB)
2.5 inch SSD: SATA 42.24TB
(11x 3.84TB),
SAS 10.56TB (11x 960GB)
2.5 inch PCIe SSD: PCIe 3.2TB
(2x 1.6TB)
(When an optional HDD cage
is added)
2.5 inch HDD: SATA 18TB
(9x 2TB),
SAS 16.2TB (9x 1.8TB)
2.5 inch SSD: SATA 34.56TB
(9x 3.84TB),
SAS 8.64TB (9x 960GB)
2.5 inch PCIe SSD: PCIe 16TB
(10x 1.6TB)
(When optional HDD cage is
added)
3.5 inch HDD : SATA 40TB(4x
10TB)
2.5 inch HDD : SATA 2TB(1x
2TB), SAS 1.8TB(1x 1.8TB)
2.5 inch SSD : SATA 3.84TB
(1x3.84TB)
SAS 960GB (1x960GB)
(When an optional HDD cage is
added)
Hot-swap Capable
Interface specification and
RAID configuration
SATA 6Gb/s : RAID 0/1/5/6/10/50/60 (Option),
SAS 12Gb/s : RAID 0/1/5/6/10/50/60 (Option)
Optical disk drive
Connection of built-in/ external drive (Option) *1
FDD
Option: flash FDD(1.44MB) *2
Expansion bay
-
Expansion Corresponding
Slots
Standard configuration
1x PCI Express 3.0 (x16 lanes, x16 sockets) (full-height, 3/4 length/slot1)
1x PCI Express 3.0 (x8 lanes, x8 sockets) (low profile, half-length/ slot2)
1x PCI Express 3.0 (x8 lanes, x8 sockets) (exclusive use for RAID controller)
1x PCI Express 3.0 (x8 lanes, x8 sockets) (exclusive use for LOM card)
(You can change PCI configuration by preparing optional raiser cards. See the system configuration guide
for the detailed information. )
Graphics
Built-in chips/ video RAM
Internal management controller chip/ 16MB
Graphics and resolution
1677 million colors: 640x480, 800x600, 1,024x768, 1,280x1,024, 1,600x1,200, 1,920x1,200
Standard interface
Front
Standard specification
1x USB3.0(Type A), 1x USB2.0(Type A) (for iLO)
Options
1x USB3.0 (Type A), 1x Status LED Panel
(Systems Insight Display)
Standard specification
1x USB3.0(Type A), 1x USB2.0(Type A) (for iLO)
Options
1x USB3.0 (Type A), 1x Status LED Panel (Systems
Insight Display),
1xDisplayport,1xUSB2.0(Type A)
Rear
2x USB3.0 (TypeA), 1x Analog RGB (Mini D-Sub pin),
1x Management Dedicated LAN Connector (Compatible with 1000BASE-T/100BASE-TX/10BASE-T,
RJ-45)
4x Data LAN Connector (Compatible with 1000BASE-T/100BASE-TX/10BASE-T (RJ-45))
1x Serial Port (Option)
Internal parts
2x USB3.0 (TypeA), 2x (4x SATA2.0 Port), 1x (2x SATA2.0 Port)
Redundant power supplies
Capable (Optional, hot plug-able)
Redundant fans
Capable (Standard specification, hot plug-able)
Dimensions (Width x depth x height)
434.6mm × 707.0mm × 42.9mm (Front bezel/ rails
/protuberances not included)
434.6mm × 749.8mm × 42.9mm (Front bezel/ rails/
protuberances not included)
Mass (Minimum*3 / maximum)
14kg /26kg
14kg/29kg
