2. Description on System Utility
Express5800/R120h-1M User’s Guide
198
Chapter 3 Setup
(3/3)
Category
Description
To be changed
Remark
Boot
Enable X2APIC
feature
according to
your OS.
Advanced > Processor Configuration > X2APIC >
Disabled *1
・
Disable X2APIC for the following OS.
－
Windows Server 2012 R2
－
Windows Server 2016
－
VMware ESXi 6
－
VMware ESXi 6.5
The setting must be done in
compliance with the
checklist before setup in the
installation guide of your OS
For Windows: [Chapter 1
Installing Windows]
Security
Set a password
Set your password in
System Configuration
>
BIOS/Platform Configuration (RBSU)
>
Server
Security
-
Set Admin Password
If you set your password,
your are prompted to enter
the password from the next
time you start System Utility
Restrict bootup by
entering password
Set your password in
System Configuration
>
BIOS/PlatformConfiguration (RBSU)
>
Server
Security
using
Set Power On Password
If you set your password,
your are prompted to enter
the password from the next
time you start the system
To make Intel(R)
TXT(Trusted
Execution
Technology), which is
needed for
tboot(Trusted Boot),
enabled
Install optional TPM kit and set to
Enabled
in
System Configuration
>
BIOS/Platform
Configuration (RBSU)
>
Server Security
- Intel
(R) TXT Support.
Do not disable TPM with the
TPM management module
after setting [TXT Support]
to [Enabled] to start OS.
You may not be able to
change [TPM Support] and
[TXT Support].
In that case, execute [F7:
Load Defaults].
UPS
Powerlink
When the server is
supplied with power
from UPS, always turn
on the power.
Set to
Always Power On
in
System
Configuration
>
BIOS/Platform Configuration
(RBSU)
>
System Options
>
Server Availability
-
Automatic Power-On
If you connect UPS via
RS232C, make console
redirection setting invalid
from System Utility (set to
Disabled
in
BIOS Serial
Console Port
).
If it is turned off by
using POWER switch,
leave it OFF even
when UPS supplies
power.
Set to
Restore Last Power Stats
in
System
Configuration
>
BIOS/Platform Configuration
(RBSU)
>
System Options
>
Server Availability
-
Automatic Power-On
Keep the power OFF
even when UPS
supplies power.
Set to
Always Power Off
in
System
Configuration
>
BIOS/Platform Configuration
(RBSU)
>
System Options
>
Server Availability
-
Automatic Power-On
*1 The factory setting is that “the Boot Mode menu” is set as “UEFI” and “the X2APCI menu” is set as “Enabled”.
