1. Installing Internal Optional Devices
Express5800/R120h-1M User’s Guide
157
Chapter 2 Preparations
Removing the PCIe SSD Drive
To remove the PCIe SSD drive, follow the procedure below. In addition, when discarding or transferring the
removed PCIe SSD drive, make sure to erase the data at your own risk in accordance with
Chapter 1 (1. Transfer
and storage)
of the
"Maintenance Guide."
Important NEC assumes no liability for data leakage should the product be transferred
to a third party without erasing the data.
To remove the components, follow these steps.
No.
Item
1 release
lever
2
Activity ring LED
3
Do not remove switch / LED
4 Power
switch
1.
Press the power switch.
The Do Not Remove switch illuminates and flashes.
Note
Do not remove the PCIe SSD from the drive bay if the LED of the removal prohibit
switch is flashing. The flashing LED of the removal prohibit switch indicates that
the device is still in use. Removing the PCIe SSDSSD before completion of the
device signal and traffic flow may result in data loss.
2.
Wait until the flashing stops and the Do Not Remove switch is no longer illuminated.
Push the Do Not Remove switch and open the release lever.
3.
Remove the drive.
4.
Install the SFF (2.5-inch) drive blank in the drive bay unused.
