1. Installing Internal Optional Devices
Express5800/R120h-1M User’s Guide
142
Chapter 2 Preparations
11. Attach the rear drive riser card to the position of the primary riser card. Align the terminal part of the riser
card with the slot part on the motherboard, and insert them securely.
12. Connect the data cable and the power cord as shown below.
13. See Chapter 2 (
1.26 Installing Top Cover
) to attach the top cover of the server.
Note
In order to prevent damage of the system due to improper cooling or elevated
temperature, please do not activate the server or enclosure without implementing
any of component or blank on all of drive bays and device bays.
14. Install the driver or the dummy tray.
15. Please
see
Chapter 2 (2 Installation and Connection)
in this manual to conduct installation and connection,
and turn the power supply ON.
Removal
The procedure for removal is the reverse of installation.
Re-attach the blank cover if you operate without it attached.
Important Re-attach the blank cover removed to maintain the internal cooling.
Rear drive riser card
