1. Turning on the Server
Express5800/R120h-1M User’s Guide
186
Chapter 3 Setup
1.
Turning on the Server
Pressing POWER Switch at the front of the server turns on the server.
Turn on the server by using the following procedure.
Turn on a display, an Uninterruptible Power Supply (UPS), and other peripherals.
Note
If the power cord is connected with the power supply control unit such as
uninterruptible power supply (UPS), make sure that the power supply
control unit is turned ON.
Remove Front Bezel.
When the STATUS lamp flashes green (once per second), wait until the lamp lights in steady state.
Press POWER Switch at the front of the server.
POWER LED flashes green (once per second) and after a while, logo appears on the display.
Important Do not connect/disconnect USB devices during POST execution.
・
2.5-inch drive model
POWER Switch
