1. Installing Internal Optional Devices
Express5800/R120h-1M User’s Guide
137
Chapter 2 Preparations
1.20
4x 3.5-inch drive model Optical Disk Drive
4x 3.5-inch drive model can be attached to the universal media Bay optical disk drive.
Installing the optical disk drive N8151-137/138
Note
In order to prevent the damage to electronic components, please start to install the
system after conducting the appropriate anti-static treatment. There is a possibility
of causing electrostatic discharge if appropriate grounding wire treatment is not
conducted.
Please prepare the following before installing the option.
Parts included in the option kit
T-10 hexalobular driver
Optical disc drive cable kit (K410-375(00))
DVD-ROM drive (N8151-137), DVD-Dual drive (N8151-138)
To install the components, follow these steps.
1.
Back up all data in the server.
2.
See steps 1 to 6 in
Chapter 2 (1.2 Overview of Installation and Removal)
for preparations.
3.
Remove the optical disk drive blank cover.
The blank cover of drive can be detached by pushing out the right end of cover from the inside to the outside
or by pulling it out.
Optical disk drive bay
The right side of optical disk
drive blank cover
Push it out from the inside to
the outside or pull it out.
