NEC ElectraElite IPK, Programing Manual

Page: 557 / 719

2 - 486 Memory Blocks
___________________________________________________________________________________
Document Revison 1 Elite IPK
___________________________________________________________________________________
4-31 Receiving Internal/All Call Page
Selection
General Description
Use this Memory Block to specify per station whether or not an Internal Zone or
Internal All Zone Page is received.
Display
Settings
Notes
LK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8 The shaded
selection is the
default.
YS NO
Programming Procedures
1 Go off-line.
2 Press LK4 +
CA
to access the Memory Block.
3 Press LK2 to disable Internal Zone or Internal All Zone page for Tel Port No.
Use the following to enter data:
J
to move the cursor left
L
to move the cursor right
K
~
I
to enter numeric data or Tel Port No.
– OR –
D
to go to next assigned Tel Port No.
B
+
A
to enter A for Port Numbers 100~109
B
+
B
to enter B for Port Numbers 110~119
B
+
C
3 to enter C for Port Number 120
4 Press
G
to write the data and display the next Memory Block.
5 Program the next Memory Block or press
E
to go back on-line.
1. Internal Emergency All Call Page and Internal Paging by Tenant group override this Memory Block. Refer to
Memory Block 1-1-46 [Access Code (1-Digit) Assignment].
2. Telephone ports A0~C0 are ports 100~120.
Telephone Mode
4
Submode
—
Data No.
31
PC Programming
¦
+BTT
Data
No.
0 1 / 3 1 : P A G I N G Y S
T I M E D I S P L A Y
Tel
Port
No.
(01
~
C0)
Title
Setting
Data