NEC ElectraElite IPK, Programing Manual

Page: 374 / 719

Electra Elite IPK Document Revision 1
Programming Manual 2 - 303
___________________________________________________________________________________
___________________________________________________________________________________
1-15-01 Common Signal Channel Data Speed
Assignment
General Description
Use this Memory Block to assign the Data Transmission speed for each Common
Signaling channel.
DisplayS
Settings
LK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8 The shaded
selection is the
default.
64k 56k 48k(1) 48k(2)
Programming Procedures
1 Go off-line.
2 Press LK1 + LK15 +
KA
to access the Memory Block.
3 Press the corresponding CO/PBX line key to change the Setting Data option.
Two adaptation rates are available with the 48 Kbps data transmission.
The adaptation method must match the rate adaptation of the clock source
office.
Data format for 48k(1) is as follows:
Data format for 48k(2) is as follows:
4 Press
G
to write the data.
5 Press
E
to go back on-line.
System Mode
1
Submode
15
Data No.
01
PC Programming
¦
+AW
0 1 : C C H 1 = 5 6 k
T I M E D I S P L A Y
Data
No.
Setting
Data
Title
1
1
Data
1
1
Data